#Truck preflight inspection how to
#Truck preflight inspection manual
#Truck preflight inspection skin

Yes, there is much to inspect on our aircraft and in our cockpit before we fly. I’d then ask which items could be eliminated. I used to run a preflight safety seminar where we listed all the important items to be covered on the preflight. No, it doesn’t have to be in our hand as we conduct our preflight, but it must be reviewed to ensure that everything was accomplished. Rushing is a distraction and we need to conduct our preflight distraction-free. I once flew with a very wise Flight Engineer in the Air Force who would immediately slow down his preflight if he felt he was being rushed.

#Truck preflight inspection how to

For more on how to create and enforce these simple rules, reach out to the materials handling experts at Liftow.I think the key to any preflight should be quality rather than quantity. All problems identified during the check, no matter how small, should be properly documented and pointed out to a supervisor.Įnlist the help of your team to keep your forklifts safe and well maintained. If operators identify any problems with the lift truck-from a non-working signal light to a loose mast chain-the truck should be removed from operation immediately and placed in service. A clean, dry floor under the truck nothing should be leaking. Tanks that fit within the profile of the lift truck.ħ. Propane tanks are neither dented nor cracked.Ħ. Tank restraint brackets are tight and in good repair.ĥ. Hoses and connectors are tight, in good repair, and not leaking or damaged.Ĥ. A pressure relief valve that is pointing up.ģ. As you create your standard checklist, encourage operators to look for:Ģ. Propane forklifts will require a specific set of prechecks to ensure the propane tanks are secure and properly attached. Examine:ġ) Cable connectors for frayed and damaged wiresĢ) Battery restraints to make sure they’re secureģ) Hood latches to make sure they’re tight, andĤ) Electrolyte levels. But generally, a visual inspection will suffice.

#Truck preflight inspection skin

Considerations for Electric Lift Trucksīe conscious of safety-including eye protection and skin protection-if you need to make contact with electrolyte levels or exposed wires.

#Truck preflight inspection manual

Manual: Ideally, the operator’s manual for the lift truck should be onboard and readable. Safety devices: All safety elements, including seatbelts, decals, stickers and signals should be readable, operational and secure. Check for gouges and other signs of damage.įorks: Take a close look at the forks to make sure the heel and top clip retaining pin are in place and secure.

Tires: The tires should be sound and pressure should be within range. Don’t do this with your hands instead, reach in with a stick or pole. Hydraulic hoses and mast chains: Look for leaks, cracks and defects. If levels are dropping too quickly, make a note of it. Here are a few items to examine in order.įluid levels: Check for oil, water and hydraulic fluid. Propane and electric lift trucks require slightly varied areas of attention or lift training / formation, but both will need a general overview first. An easy preflight checklist doesn’t just prevent accidents it also keeps expensive equipment protected and maintained, which can extend the life of the lift and its component parts. Before beginning a shift, forklift operators should protect themselves and their co-workers from harm by conducting a simple, preflight check to make sure the lift truck is functional and in safe operating condition.